RTLV4000 series current mode voltage sensor is a device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit, It provides accurate electronic measurement of DC、AC or pulsed voltage.
Electrical data(Ta=25℃±5℃)
Parameter | Type | RTLV 100 | RTLV 200 | RTLV 300 | RTLV 500 | RTLV 1000 | RTLV 2000 | RTLV 3000 | RTLV 4000 | Unit |
Rated input (Vpn | 100 | 200 | 300 | 500 | 1000 | 2000 | 3000 | 4000 | V | |
Measure range(Vp) | 200 | 400 | 600 | 1000 | 2000 | 4000 | 6000 | 6000 | V | |
Total input consumption | 0.25 | 0.50 | 0.75 | 1.25 | 2.5 | 5.0 | 7.5 | 10 | W | |
Rated input (Ip) | 2.5 | mA | ||||||||
Turns ratio(Np/Ns) | 20000:1000 | T | ||||||||
Secondary coil resister | @ +85℃ | 55 | Ω | |||||||
Rated output (Isn) | @Vp=±Vpn | ±50±0.5% | Ω | |||||||
Resister measured | @ ±15V VPN | 50(min), 200(max) | Ω | |||||||
@ ±15V 2XVPN | 0(min), 100(max) | Ω | ||||||||
@ ±24V VPN | 100(min),330(max) | Ω | ||||||||
@ ±24V 2XVPN | 100(min),200(max) | Ω | ||||||||
Supply voltage | ±15 - ±24 | V | ||||||||
Consumption current | 20+IpX(Np/Ns) | mA | ||||||||
Offset current | @ Vp=0 | ≤±0.2 | mA | |||||||
Offset drift | @ -40~+85℃ | ≤±0.6 | mA | |||||||
Linearity | @ Vp =0-±Vpn | ≤0.1 | %FS | |||||||
Response time | ≤200 | uS | ||||||||
Galvanic isolation | @ 50HZ,AC,1min Between primary and secondary + shield 12.0 | KV | ||||||||
@ 50HZ,AC,1min Between secondary and shield 2.0 | KV |